hi yield killzall mixing instructions

Hi-Yield Killzall Mixing Instructions⁚ A Comprehensive Guide

Achieving effective weed control with Hi-Yield Killzall requires precise mixing. This guide provides comprehensive instructions for various Killzall products.

Understanding Hi-Yield Killzall Products

Hi-Yield Killzall products are herbicides designed to eliminate unwanted vegetation. Knowing the type of Killzall product you have is the first step. The super concentrate formula with 41% Glyphosate, and double-surfactant action, is a post-emergent, non-selective herbicide, meaning it kills any plant it contacts. Killzall is rainfast in as little as two hours. There are formulations for general weed control, tough brush, and total vegetation control. Some Killzall products, like Killzall 365, prevent new weeds from growing for up to a year in treated areas. Understanding whether you need spot treatment, general weed control, or long-term prevention is key to selecting the right product and mixing it correctly. Always read the product label for specific instructions, as mixing ratios can vary. Hi-Yield products are manufactured by Voluntary Purchasing Groups and the mixing instructions are very easy to follow.

Types of Killzall Products

Hi-Yield offers several Killzall products, each designed for specific weed control needs. Understanding the differences is crucial for effective use.

Killzall Weed & Grass Killer

Killzall Weed & Grass Killer is a non-selective herbicide ideal for spot treatments and clearing areas before reseeding. Its ultra formula with surfactant ensures fast drying and rainfastness within two hours. Perfect for use near fences, paths, patios, curbs, sidewalks, driveways, and around trees, shrubs, flower beds, and buildings, this product effectively kills weeds down to the roots. It contains a double-surfactant formulation that starts working quickly. Because it’s non-selective, avoid contact with desirable plants. Mix 2 1/2 fl. oz. (5 Tbs) per 1 gallon of water, treating approximately 300 sq. ft. This formulation contains 41% Glyphosate. It’s designed for multiple uses. It is our preferred product for removing weeds and grasses before re-seeding your lawn. Be cautious when using this product, as it can harm any plant it comes into contact with. Remember to close the cap tightly after use, with no need to rinse the cap. It eliminates nearly all common weeds, grasses, and unwanted vegetation.

Killzall 365

Killzall 365 combines Glyphosate 43% and Imazapyr 0.78% for total vegetation control, preventing new weed growth for up to one year. Ideal for parking lots, sidewalks, driveways, gravel areas, and around fences/buildings, where no vegetation is desired. Apply to bare soil for longest residue or spray weeds/grasses generously for control and lasting effect. Avoid spraying near desirable plants. For gravel driveways, use 7.4 fl. oz; (0.46 pints) with water to create 1-10 gallons of spray, covering 1000 sq ft. For spot control of brush, vines, and weeds, mix 6 oz. per 1 gallon of water. Apply to actively growing brush and vines in late summer and fall. Killzall 365 is a weed and grass killer that keeps new weeds from growing in the treated area for up to one year. Apply KIllzall 365 to bare soil to get the longest residue or spray weeds and grasses generously to both a good control and long lasting residue. Do not spray on or near desirable plants, or death may occur to desirable plants.

General Mixing Ratios for Killzall Super Concentrate

Killzall Super Concentrate mixing varies depending on the targeted weeds; Follow these guidelines for standard and tough weed control.

Standard Weed Control

For typical weed infestations, the recommended mixing ratio for Hi-Yield Killzall Super Concentrate is 3 tablespoons per gallon of water. This concentration is effective for eliminating most common weeds and grasses in areas such as fences, paths, patios, sidewalks, curbs, and driveways. When using a tank-type sprayer, ensure thorough mixing by swirling the sprayer after adding both the Killzall concentrate and water. This mixture is generally enough to treat approximately 300 square feet. For optimal results, apply the solution evenly across the targeted area, ensuring complete coverage of the weeds. This standard mixture is ideal for maintaining weed-free zones around your property and preventing new growth. Remember to avoid spraying desirable plants, as Killzall is a non-selective herbicide and can harm any vegetation it contacts. Consistent application and monitoring of treated areas will help maintain effective weed control throughout the season. Always refer to the product label for specific instructions and safety precautions before use.

Tough Weed and Brush Control

For particularly stubborn weed infestations or controlling brush, a stronger concentration of Hi-Yield Killzall Super Concentrate is necessary. The recommended mixing ratio for tough weed and brush control is 5 tablespoons per gallon of water. This higher concentration ensures that the herbicide effectively penetrates the thicker foliage and root systems of resilient weeds and brush. When preparing the solution, thoroughly mix the Killzall concentrate with water in a tank-type sprayer, ensuring it is well-integrated before application; This mixture is suitable for spot treatments on individual weeds and grasses, as well as for clearing areas with heavy weed growth. Apply the solution directly to the foliage, ensuring complete coverage for optimal results. For brush control, application in late summer or fall, when plants are actively growing, is most effective. Exercise caution to avoid spraying desirable plants, as this potent mixture can cause significant damage. Regularly monitor treated areas and reapply as needed to maintain control over tough weeds and brush. Always consult the product label for detailed instructions and safety guidelines.

Killzall 365 Mixing Ratio for Total Vegetation Control

Achieving total vegetation control with Killzall 365 requires a specific mixing ratio to ensure effective and long-lasting results in treated areas.

Application on Gravel Driveways

For total vegetation control on gravel driveways using Hi-Yield Killzall 365, the recommended mixing ratio is crucial for achieving bare ground. Apply 7.4 fl. oz. (0.46 pints) of Killzall 365 with enough water to create 1 to 10 gallons of spray solution. This amount is designed to cover approximately 1000 square feet of the gravel driveway. Ensure thorough coverage for optimal results. This application rate is specifically tailored for gravel driveways to prevent any vegetation from growing for an extended period. It’s important to apply the solution evenly across the entire area to ensure complete coverage and prevent regrowth. Proper application will result in a weed-free gravel driveway, maintaining its appearance and functionality. Remember to follow all safety precautions and wear appropriate protective gear during application. This method maximizes the effectiveness of Killzall 365, providing long-lasting vegetation control. For best results, apply to bare soil or generously spray existing weeds and grasses.

Mixing Instructions for Tank Sprayers

Tank sprayers offer efficient application. Follow these mixing instructions for optimal results and coverage when using Hi-Yield Killzall products.

Dosage per Gallon of Water

For Hi-Yield Super Concentrate Killzall Weed & Grass Killer, the general recommendation is to mix 3 to 5 tablespoons per gallon of water, depending on the severity of the weed infestation. Use 3 tablespoons for general weed control, and 5 tablespoons for tougher weeds or brush. For Killzall 365 used on gravel driveways for total vegetation control, the mixing ratio is 7.4 fl. oz. (0.46 pints) per 1 to 10 gallons of water to cover 1000 sq ft. If using Killzall Weed and Grass Killer, the mix rate is typically 2.5 fl. oz. (5 Tbs) per 1 gallon of water, which will treat about 300 sq. ft. For spot control of brush, vines, and weeds, mix 6 oz of Hi-Yield Killzall 365 per 1 gallon of water. Always refer to the product label for the most accurate and up-to-date information, as formulations and recommendations can vary. Using the correct dosage ensures effective weed control while minimizing potential harm to the environment and non-target plants. Remember to mix thoroughly and apply evenly for best results.

Coverage Area per Gallon

The coverage area per gallon of mixed Hi-Yield Killzall solution depends on the specific product and the application rate. Generally, one gallon of properly mixed Hi-Yield Super Concentrate Killzall Weed & Grass Killer (using the standard 2.5 fl. oz. or 5 tablespoons per gallon rate) will treat approximately 300 square feet. This assumes a typical application for general weed control. For more concentrated mixes, such as those used for tough weed and brush control (using 5 tablespoons per gallon), the coverage area remains roughly the same, but the effectiveness on more resistant plants is increased. When using Killzall 365 for total vegetation control on gravel driveways, a mix ratio of 7.4 fl. oz. (0.46 pints) per 1 to 10 gallons is designed to cover a 1000 sq ft area. The amount of water used within that range will affect the spray volume and how quickly you cover that area, but not the amount of herbicide applied per square foot. Always adjust your walking speed and spray pattern to ensure even coverage without excessive runoff. Proper coverage ensures the herbicide contacts all targeted plants, maximizing its effectiveness and preventing regrowth.

Important Precautions When Using Killzall

Using Killzall safely requires understanding its properties and taking necessary precautions to protect yourself, desirable plants, and the environment.

Non-Selective Herbicide

Hi-Yield Killzall is a non-selective herbicide, meaning it will kill any plant it comes into contact with. This is crucial to remember when applying the product to avoid harming desirable plants, grasses, and vegetation in your yard or garden. Always exercise caution and precision during application. Due to its non-selective nature, Killzall is ideal for clearing areas where you want total vegetation control, such as driveways, sidewalks, and gravel paths. However, careful planning and application are essential to ensure only the targeted weeds and grasses are affected, keeping your desired landscape intact. When using Killzall, consider using shields or barriers to protect nearby plants, and apply the herbicide on a calm day to prevent drift. Remember to read the product label for specific instructions and safety guidelines to maximize effectiveness and minimize unintended damage. Proper handling and application will ensure you achieve the desired results while safeguarding your valuable plants.

Avoiding Desirable Plants

Protecting desirable plants when using Hi-Yield Killzall is paramount due to its non-selective nature. To prevent accidental damage, take extra precautions during application. Use physical barriers like cardboard or plastic shields to safeguard nearby plants from spray drift. Apply Killzall on wind-free days to minimize the risk of the herbicide drifting onto unintended targets. Consider using a paintbrush or a small applicator to precisely apply the herbicide directly onto the weeds, avoiding any contact with surrounding vegetation. Before spraying, thoroughly assess the area and identify all desirable plants. Cover them with tarps or sheets if necessary. After application, immediately rinse any accidental overspray from desirable plants with water. Regularly monitor treated areas for any signs of unintended herbicide exposure and take corrective measures promptly. Always read the product label carefully for specific instructions on protecting non-target plants. Employing these strategies will help you effectively control weeds while preserving the health and beauty of your desired landscape. Remember, prevention is key to successful weed control without harming your valued plants.